Consumer
Products
Avent Manual Breast Pump

Avent Manual Breast Pump

Comfort, Includes 4oz Natural bottle SCF330/20

Troubleshooting

How do I assemble my Philips Avent manual breast pump?

Your Philips Avent breast pump is designed to easily assemble and clean. Follow these simple steps to assemble your breast pump for the next extraction.

Is everything clean?

Make sure you have cleaned and sterilised all parts of the breast pump. Wash your hands thoroughly before you handle the cleaned parts. Always use the pump with the massage cushion.

Insert the valve

Insert the white valve into the pump body from below. Push in the valve as far as possible.

Attach the bottle or storage cup

Screw the pump body clockwise onto the bottle or storage cup until it is securely fixed. If you use a storage cup, you have to screw the adapter onto the storage cup first.

Silicone diaphragm

Place the silicone diaphragm with stem into the pump body from above. Make sure it fits securely around the rim by pressing down with your fingers to ensure a perfect seal.

Snap on the handle

Attach the handle onto the diaphragm with stem by hooking the hole in the handle over the end of the stem. Push down the handle onto the pump body until it clicks into place.

Attach the massage cushion

Place the massage cushion into the funnel-shaped section of the pump body. Push in the inner part of the massage cushion as far as possible and make sure that it is perfectly sealed all around the rim of the pump body. Press in between the petals to remove any trapped air.

The information on this page applies to the following models: SCF330/20 .

Not what you are looking for?