Troubleshooting My Saeco Moltio keeps signalling 'insert the coffee bean container'. If your Saeco Moltio espresso machine's display keeps showing 'insert or fill the coffee bean container', there might be a simple solution. Disassamble and clean the beancontainer 1) Remove the coffee bean container and disassemble it. 2) Clean both parts with a cloth and place the coffee bean container back into the machine. 3) Also clean the area under the coffee bean container with a cloth. To disassemble/attach the bean container step 1 1) Push the selector to the unlock position. Lift the container with both hands. Note: If the selector cannot be pushed all the way to the unlock position, it is blocked by coffee beans. In that case move the selector back and forth until the beans are released. To disassemble/attach the bean container step 2 2) Remove all coffee residues underneath the coffee bean container with a damp cloth. To disassemble/attach the bean container step 3 3) Detach the coffee bean container and clean both parts with a cloth. Note: To detach the two parts of the coffee bean container, turn it and push down the small hooks in the bottom. To disassemble/attach the bean container step 4 4) Dry the two parts of the coffee bean container and reattach them. To disassemble/attach the bean container steps 5-6 5) Place back the coffee bean container into the machine and push the selector to the lock position. 6) Place back the lid on the bean container. Make sure that the part marked with the circle in the picture below is free from dirt and coffee beans when you place back the lid.