Consumer
Products
Shaver series 3000 dry electric shaver

Shaver series 3000 dry electric shaver

CloseCut heads Flex & Float, 35+ min cordless use/1h charge, Pop-up trimmer HQ6996/16

Troubleshooting

How to remove the shaving heads of my Philips shaver.

Removing or replacing your Philips shaving head is easy. Just follow these simple steps.

Removing the shaving heads

1) Switch off the shaver. Remove the mains plug from the wall socket and pull the appliance plug out of the shaver.

2) Remove the shaving unit from the shaver.

3) Turn the wheel anticlockwise (1) and remove the retaining frame (2) (Fig. 1).

Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored.

4) Remove the cutters and guards and clean them with the provided cleaning brush.

Disassembling shaving head

Placing the shaving heads back:

1) Put the cutters back into the guards (Fig. 3)

2) Put the shaving heads back into the shaving unit. (Fig. 4)

3) Put the retaining frame back into the shaving unit, push it down (1) and turn the wheel clockwise (2) (Fig. 5)

4) Check if the retaining frame is locked. (Fig. 6).

5) Put the shaving unit back onto the shaver.

Assembling shaving head

The information on this page applies to the following models: HQ6996/16 , AT750/20 , 6900LC/41 , AT750/41 , PT725/20 , 6955XL/18 , AT752/20 , AT751/14 , PT720/20 , PT715/41 , PT715/17 , PT715/16 , PT715/15 , PT710/20 , AT751/16 , HQ6990/33 , HQ6970/33 , HQ6940/33 . more less

Troubleshooting

Power/Charging(1)

Not what you are looking for?