Consumer
Products
Philips AquaTouch Wet and dry electric shaver AT928/20 TripleTrack blades Pivoting heads with Pop up trimmer and Aquatec wet & dry

Philips AquaTouch Wet and dry electric shaver AT928/20 TripleTrack blades Pivoting heads with Pop up trimmer and Aquatec wet & dry

AT928/20

Troubleshooting

I can not place my Philips shaver in the Jet Clean

There may be several reasons why you can't place your Philips shaver in the Jet Clean. Below are the most common issues and what you can do to solve them.

Check the position of the holder

Make sure the holder is in the highest position as the shaver cannot be placed in the Jet clean System otherwise.

  1. Put the small plug in the Jet Clean System.
  2. Put the adapter in the wall socket. The holder automatically moves to the highest position.
  3. Place the shaver upside down in the holder with the display pointing towards the front of the Jet Clean System.
  4. Press the shaver tightly into the holder to lock it into place.

Note: The shaver cannot be placed in the Jet Clean System when the protection cap is on the shaving unit.

The information on this page applies to the following models: AT928/20 , AT890/20 , AT920/41 , AT890/41 , PT920/20 , PT860/20 , AT891/16 , AT940/20 , AT893/20 , PT925/20 , AT891/14 , PT870/14 , PT870/20 , PT870/22 , RQ1160/16 , RQ1280/22 , RQ1280/21 , RQ1280/17 , RQ1280/16 , RQ1260/22 , RQ1260/21 , RQ1260/17 , RQ1260/16 , RQ1250/22 , RQ1250/21 , RQ1250/17 , RQ1250/16 , RQ1180/17 , RQ1180/16 , RQ1160/22 , RQ1160/21 , RQ1160/17 , RQ1290/23 , RQ1050/18 , RQ1060/20 , RQ1075/22 , RQ1090/20 , RQ1095/22 . more less

Not what you are looking for?