Consumer
Products
PicoPix Pocket projector

PicoPix Pocket projector

140 lumens, with WiFi PPX3614/F7

Troubleshooting

How to connect the Philips PicoPix 3610/3614 to a Windows Laptop ?

If your laptop has a VGA connector:

  1. Connect the optional VGA cable PPA1250 to the PicoPix and to your laptop.
  2. Turn on the PicoOix and select the VGA source.
  3. If the PicoPix is not detected, activate the VGA output on your laptop.

If your laptop has HDMI connector :

  1. Connect a standard Hdmi/mini Hdmi cable to the PicoPix and to your laptop.
  2. Switch on the PicoPix and select the Hdmi source.
  3. If the PicoPix is not detected, activate the Hdmi output on your laptop.

Please note:

if the projection fails to start check that you are using resolution 800* 600.

  1. Try to reboot your laptop.
  2. Check that you are using the original Philips PicoPix VGA cable PPA1250 or a certified (mini)HDMI cable
  3. Check that the VGA-output/HDMI output on the computer is activated. For example, on some laptops, you will have to use the Fn+F5 or Fn+F7 to activate the VGA or HDMI output.

The information on this page applies to the following models: PPX3614/F7 , PPX3610/F7 .

Not what you are looking for?