My Philips/Saeco espresso machine wastes coffee powder without brewing a cup
If your Philips/Saeco espresso machine throws away dry coffee powder without dispensing coffee, you can often mend it yourself. Find out how to resolve it.
When brewing a pre-ground coffee
Only use one stroked coffee spoon of pre-ground coffee with the provided coffee spoon.
Restart the machine by switching it off and back on
Select pre-ground coffee with the aroma strength button
Add one stroked coffee spoon of pre-ground coffee
Press the espresso button
In regular use
The brew group might be clogged, dirty or not well greased. This might keep it from moving into the right position to brew coffee.
Clean and grease the brew group
Switch the machine OFF and wait until it stops producing sounds (this can take up to 15-20 seconds)
Remove the brew group and rinse it with fresh water. Pay extra attention to the filter on the brew group
Make sure the brew group is well greased, see video for instructions
Place back the brew group, coffee grounds container, drip tray and close the service door
Switch the machine back ON
Use the coffee oil remover tablet (CA6704) to thoroughly clean the brew group.
You need Flash to see video. Click here
to download it.
Not enough coffee beans
After ginding coffee beans, there might not be enough coffee powder to brew a coffee. When the espresso machine measures a low amount of coffee in the brew group, it will throw away the coffee powder and prompt a message stating the coffee bean container is empty. Fill your coffee bean container and try again.